Risk explanation: Glitter

This is not a major issue, using glitter does come out well, but the issue is the speed of the order going through production.

We need to clean the scanner after every 1-2 pictures because after each piece of art – the glitter goes everywhere – all through the scanner.  

Ideally, if you do use glitter, please use plenty of glue and once it is dry – shake it well, so that all the loose glitter is removed.  

Better yet, the glitter pens which is a mixture of glue and glitter – these generally don’t result in a lot of loose glitter.

On the scanned picture below, you can see where some of the glitter still looks… glittery (gold – green – red), whereas the blue and silver are a lot duller.

On some pictures, after scanning, it can be quite hard to see that glitter has been used.  This is probably where the glitter is quite thin.  Again, looking at the picture below, where the glitter is thickly applied, it is quite clear it’s glitter, whereas when it is thin, and especially around the edge of the paper, it looks more like coloured sand.